Measuring Propagation Speed of Coulomb Fields

The problem of gravity propagation has been subject of discussion for quite a long time: Newton, Laplace and, in relatively more modern times, Eddington pointed out that, if gravity propagated with finite velocity, planets motion around the sun would become unstable due to a torque originating from time lag of the gravitational interactions. Such an odd behavior can be found also in electromagnetism, when one computes the propagation of the electric fields generated by a set of uniformly moving charges. As a matter of fact the Li\'enard-Weichert retarded potential leads to a formula indistinguishable from the one obtained assuming that the electric field propagates with infinite velocity. Feyman explanation for this apparent paradox was based on the fact that uniform motions last indefinitely. To verify such an explanation, we performed an experiment to measure the time/space evolution of the electric field generated by an uniformely moving electron beam. The results we obtain on such a finite lifetime kinematical state seem compatible with an electric field rigidly carried by the beam itself.Comment: 23 pages, 15 figure

Form factor of baryons and light hadrons at BESIII: Recent results and next program

The BESIII experiment at the Beijing τ-charm factory BEPCII has recently embarked at a series of form factor measurements both of light mesons and light baryons. The goal is to measure for the first time hyperon form factors and to improve experimental knowledge of the hadronic contributions to gμ-2. The preliminary results and the expected improvements, based on the integrated luminosity collected during 2012–2015 runs, are presented

Beam test of scintillation tiles with MPPC readout

This paper describes measurements made using counters composed of a small (3 by 3 by 0.5 cm3) scintillation tile coupled to a Multi-Photon Pixel Counter (MPPC) produced by Hamamatsu and exposed to an electron beam at the Beam Test Facility in Frascati. We show our first results for charge spectra and efficiency, and a very preliminary measurement of device linearity

First operation and perspectives of the superconducting linac LISA

n/

A new concept for streamer quenching in resistive plate chambers

In this paper we propose a new concept for streamer quenching in Resistive Plate Chambers (RPCs). In our approach, the multiplication process is quenched by the appropriate design of a mechanical structure inserted between the two resistive electrodes. We show that stable performance is achieved with binary gas mixtures based on argon and a small fraction of isobutane. Fluorocarbons, deemed responsible for the degradation of the electrode inner surface of RPC detectors, are thus fully eliminated from the gas mixture. This design {also resulted} in a simplified assembly procedure. Preliminary results obtained with a few prototypes of ``Mechanically Quenched RPCs'' and some prospects for future developments are discussed

A model to explain angular distributions of J/ψJ/\psi and ψ(2S)\psi(2S) decays into ΛΛ‾\Lambda\overline{\Lambda} and Σ0Σ‾0\Sigma^0\overline{\Sigma}^0

BESIII data show a particular angular distribution for the decay of the $J/\psi$ and $\psi(2S)$ mesons into the hyperons $\Lambda\overline{\Lambda}$ and $\Sigma^0\overline{\Sigma}^0$. More in details the angular distribution of the decay $\psi(2S) \to \Sigma^0\overline{\Sigma}^0$ exhibits an opposite trend with respect to that of the other three channels: $J/\psi \to \Lambda\overline{\Lambda}$, $J/\psi \to \Sigma^0\overline{\Sigma}^0$ and $\psi(2S) \to \Lambda\overline{\Lambda}$. We define a model to explain the origin of this phenomenon.Comment: 6 pages, 7 figures, to be published in Chinese Physics

Test of large area glass RPCs at the DA Phi NE Test Beam Facility (BTF)

Abstract The CaPiRe program has been started to develop a new detector design, in order to produce large areas of glass Resistive Plate Chambers (RPC) detectors, overcoming the previous limitations. As a first step we produced our glass RPC detectors ( 1 m 2 ) at General Tecnica exploiting their standard procedures, materials and production techniques simply using 2 mm glass electrodes instead of the bakelite ones. A set of RPC was produced by using pre-coated (silk screen printed) electrodes, while others were produced with the standard graphite coating. All the detectors, together with four old Glass RPC acting as reference, were tested at the DA Φ NE Test Beam Facility with 500 MeV electrons in order to study the efficiency in different positions inside the detectors (i.e. near spacers and edges) and to study the detector behavior as a function of the local particle rate

A robust and powerful green light photoemission source: The ferroelectric ceramics

The photoemission characteristics of ceramic disks of lead zirconate titanate lanthanum doped (PLZT), have been investigated. We observe 1 nC of extracted charge under an accelerating field of 20 kV/cm in poor vacuum conditions. The emission is clearly limited by space charge effects. The extrapolated quantum efficiency results in ≈10−6. The yield of a PLZT ceramic in the ferroelectric state and its slope versus light intensity have turned out higher than those of antiferroelectric ceramic. Samples in different experimental configurations have shown different nonlinear yields